Racing.jpg

Latest News

Kenne Bell Synthetic Supercharger Oil

Packaging
#10650 - 237ml

 

 

 

 

Super Coolant

Lucas Super Coolant has been scientifically formulated to provide the ultimate protection in automotive and racing cooling systems. It protects the entire system from rust, corrosion and electrolysis including aluminum.

Our unique formula prevents deposits that can cause overheating, and has been proven to reduce coolant temperatures up to 20°F.
Lower cylinder head temperatures means advanced ignition and more horsepower.

 

BENEFITS

Lower cylinder head temps
Allow advanced ignition, timing and more horsepower
Reduce operating temperatures by up to 20°
Prevents corrosion, electrolytes and deposits that cause leaks, overheating, and cooling system failures

 

DOSAGE

For street vehicles requiring freeze protection, add 1 bottle to 50/50 mix. For racing and high performance applications, add 2 bottles to straight water coolant for maximum temperature reduction.

One bottle treats 12-20 quarts of a 50/50 water antifreeze mix. Two bottles are required for straight water coolant. For passenger cars, light trucks and SUV's use every 30,000 miles. For racing applications use every race as needed.

 

DIRECTIONS

With engine off and cool, shake bottle and pour into radiator. Start engine, turn heat on high and run for 10-15 minutes to circulate through entire cooling system. If straight water coolant is used, tap water or softened water is recommended. DO NOT use distilled water unless mixed with 50% antifreeze.

Packaging:

#10640 - 473ml

MSDS
TDS

 

 

Lucas S1 Racing Shock Oil

Lucas Oil Products developed S1 Racing Shock Oil to provide exceptional viscosity stability, anti-friction and anti-foam properties for use in all high performance suspension systems. Applications include off road racing shocks, motocross,  supercross, conventional and upside down forks, circle track racing and more. Lucas specially formulated friction modifiers increase lubricity for minimum friction and for more responsive handling.  Guaranteed to improve a narrow, consistent, rebounding range and easy suspension tuning.

 

Key Benefits
  • Superior Damping
  • Controls Heat
  • Lower Operating Temperatures
  • Excellent Thermal Stability
  • Contains special anti-wear and lubricity agents
  • Excellent for high performance and heavy-duty applications
Packaging

#10488 - 946ml
#10548 - 5ltr

MSDS

 

 

Lucas S2 Racing Shock Oil

Lucas Oil Products developed S2 Racing Shock Oil to provide exceptional viscosity stability, anti-friction and anti-foam properties for use in all high performance suspension systems. Applications include off road racing shocks, motocross,  supercross, conventional and upside down forks, circle track racing and more. Lucas specially formulated friction modifiers increase lubricity for minimum friction and for more responsive handling.  Guaranteed to improve a narrow, consistent, rebounding range and easy suspension tuning.

Key Benefits
  • Superior Damping
  • Controls Heat
  • Lower Operating Temperatures
  • Excellent Thermal Stability
  • Contains special anti-wear and lubricity agents
  • Excellent for high performance and heavy-duty applications
Packaging

#10489 - 946ml
#10552 - 5ltr

TDS
MSDS

 

 

Synthetic SAE 140 Racing Gear Oil

Synthetic SAE 140 Gear Lubricant is designed for high horsepower, high torque conditions. Made from the highest quality heavy synthetic base oils, Lucas Racing Gear Oils contain a proprietary package of additives and extreme pressure lubricants specially engineered for shear stability and the demands of severe racing conditions. This synthetic formulation provides a barrier cushion between metal surfaces. It absorbs impact by creating a barrier coating on gear surfaces for the critical line of protection against wear, pitting and scoring. This oil is long lasting and perfect for any heavy duty application.

Synthetic SAE 140 Racing gear oil is designed for the Top Fuel and the off-road industry.
Ideal applications: Pro 2, Pro 4, ProLite, Class 7/6, 7200

 

Key Benefits

•Reduced oil temps in rear differentials
•Excellent thermal and shear stability
•Extends component life

Packaging

#10431 - 5ltr
#10433 - 18.9ltr

TDS
MSDS

 

 

Synthetic SAE 250 Racing Gear Oil

Synthetic SAE 250 Gear Lubricant is designed for high horsepower, high torque conditions. Made from the highest quality heavy synthetic base oils, Lucas Racing Gear Oils contain a proprietary package of additives and extreme pressure lubricants specially engineered for shear stability and the demands of severe racing conditions. This synthetic formulation provides a barrier cushion between metal surfaces. It absorbs impact by creating a barrier coating on gear surfaces for the critical line of protection against wear, pitting and scoring. This oil is long lasting and perfect for any heavy duty application.

Synthetic SAE 250 is designed for performance and racing applications that face the most severe racing conditions and other applications subject to extreme shock loading and high pressure. 250 Racing gear oil was developed with the desert racers in mind. Use in trophy trucks and pulling tractors to protect the rear differential during heavy shock loads and extreme temperatures.

Tested and proven in trophy trucks putting over 750 hp to the wheels.

Key Benefits

•Reduced oil temps in rear differentials
•Excellent thermal and shear stability
•Extends component life

Packaging

#10648 - 18.9ltr

TDS
MSDS

 

 

Lucas L9 Racing Gear Oil

Gear oils have needed improving for years, especially in the hi-performance industry. The Lucas L9 Racing Gear Oil provides excellent thermal stability and longevity throughout the entire drive train system. Recommended for use in both transmissions and differentials, Lucas specifically developed this formula with special anti-wear agents and lubricity agents to control wear and drag as well as special additives to control heat. This feature is not found in ordinary gear oils. This gear oil is both excellent for racecars and any heavy-duty application where plain gear oils just aren't good enough.

With the use of our own gear box dyno and feedback from a major IRL Team, we have created these light weight friction free gear oils. They have already won in IRL, NASCAR, Pro Stock Car, Pro Stock Bikes and more.
The new technology we developed for these gear oils will now be used in all Lucas Gear Oils.
*L9 – Differentials & Transmissions
*L10 – Transmissions
*L11 – Quick Qualifier

Key Benefits
  • Perfect for super speedways
  • Increases usable horsepower to the ground by reducing drag and friction
  • Contains special anti-wear and lubricity agents
  • Special synthetic base stocks
  • Very thermal stable
Packaging

#10456 - 946ml
#10457 - 4.73ltr
#10458 - 18.9ltr

TDS
MSDS

 

 

Lucas G3 Racing Grease

A true high temp/low temp friction-free racing grease for qualifying and racing. Extreme friction reducer to minimize drag. Lucas G3 Racing Grease outperforms Kluber, Chevron, Mobil, Dupont. This specially formulated racing grease from Lucas Oil has been Dyno Tested and Track Proven in IRL, NASCAR and NHRA.

Key Benefits
  • Full Synthetic
  • Drop point 560 Degrees
  • Long Lasting
  • Timken Load 60 lbs
  • Excellent cold temperature properties
  • Resist Extreme Pressure
  • Extreme Friction Reducer
  • Designed for highest performance in wheel bearings and chassis lubrication
Packaging
#10484 - 450g Case of 10

MSDS
TDS

 

 

Lucas Contact Cleaner

 

Lucas Contact Cleaner is blended with a unique blend of solvents, cleaning agents and propellants designed to remove oil, dirt and moisture from contact points. Lucas Contact Cleaner is compatible with metals and elastomers. It is especially effective in motorcycle applications to clean electrical parts that have been exposed to high levels of oil, dirt and debris. This non-chlorinated, CFC free 45% VOC requirement for electrical contact cleaner formula dries quickly and leaves no residue.

Read entire label before using this product.

Key Benefits

● Removes Oil, Dirt and Debris

Quick Drying Formula

Leaves No Residue

Race Proven

● Compatible With Metals, and Elastomers

Packaging
#90799 - 397ml Aerosol Can

MSDS
TDS